Scenes

Camera Border

Put a border over every shot.

A border is in front of the whole scene, over every Camera shot. It can be a border you made in Patterns, a starter border, one people shared, or a flat sheet from the scene.

The Border row

CAMERA Photo16:9 · Free Set up FramingFree · 16:9›LookLofi · plain›Buildings›
← Framing
Shape1:14:516:99:163:2
BorderRain sheet · 16:9
The Border row on the Camera's Framing page, under Shape, with a sheet as the border.

In a scene, the border is set in Camera › Framing › Border (Clip Framing in a clip), under Shape. The row shows a small picture of the border that is on, with its name and shape (e.g., Rain sheet · 16:9), or None. A pattern border and a sheet can be on together; the row then shows the first with +1. Selecting the row opens the border picker. Photo scenes have the row too.

While a pattern border is on, Hide the border shows under the row. It hides the border without removing it, and photos, loops, and videos don’t include it until you show it again. Leaving the scene shows the border again.

The border picker

The picker is titled Border. It has a Yours | Community switch at the top and opens on the side you used last.

  • Yours: None, the Starters row (when there are some), Your borders, In the scene, and Make a border….
  • Community: None, the Starters row, and the borders people shared, under Shared by everyone.

The Shape row (All, 1:1, 4:5, 16:9, 9:16, 3:2) filters the list and starts on All each time. Each border shows its picture, name, and shape; a border of another shape than the Camera’s is greyed. Selecting a border makes it the border ([Name] is now the border on every shot.). A starter or shared border you select is copied into your borders (a shared one as a remix, with remix added to its name), and the scene uses the copy. Selecting it again uses the same copy.

None removes every border, sheets too, in one Undo step (Border off: the whole view shows.).

A clip shot’s Border page opens the same picker, without In the scene and Make a border…. See Borders in a clip .

A sheet as the border

Any flat sheet placed in the scene can be the border. In the scene lists the scene’s shown flat sheets, each with its nearest aspect ratio (e.g., Rain sheet · 16:9). Selecting one makes it the border: the sheet moves out of the scene and over every shot. Selecting it again (it is lit) returns it to its old spot. With no sheets in the scene, the group shows Any flat sheet can be the border: place one from the Figs drawer, then pick it here.

A sheet’s own page has the same switch. Select the sheet on the Figs tab to open its page with the Border row:

LibraryScene
Rain sheet in the scene
BorderIn the sceneAs the border
The Border row on a sheet's page.
  • As the border: Moves the sheet from the scene onto the camera. It stays in the same spot on screen.
  • In the scene: Returns it to the scene.

A sheet can be the border only while the Camera’s Shape matches the sheet’s shape, so set the shape first in Camera › Framing › Shape. Until then As the border and the sheet’s tile in the picker are greyed; selecting either shows a tip with the sheet’s shape. A sheet that is already the border can always be taken off. The Camera Border card in Learn has a Match the camera step for this, before Make it the border.

Border shapes

Borders come in set aspect ratios: 1:1, 4:5, 16:9, 9:16, or 3:2. A border shows only while the Camera’s Shape matches it, and putting one on never changes the Camera. A border or sheet of another shape is greyed, and selecting it shows a tip (e.g., The border is 3:2. Choose a border that matches the camera (16:9).).

Changing the Camera’s shape doesn’t take a border off. It stops showing, and a note under the Border row shows this (e.g., Not showing: the border is 16:9 and the camera is 3:2.). It shows again when the Camera is set back to its shape.

Each scene keeps its own Camera shape. The shape is saved with the scene and in its .scene file, the scene reopens at it, and opening another scene switches the Camera to that scene’s shape. A new scene starts at 16:9. A scene saved in an earlier version opens at 16:9, or at the shape of its border. Moving between a clip’s shots never changes the shape. The fig editor’s Camera keeps its own shape, apart from scenes.

Make a border

Make a border… is at the end of the Yours side of the picker. Selecting it shows the five shapes. Selecting one closes the Camera, leaves the scene, and starts a new model with one blank flat sheet at that aspect ratio (e.g., Border 16:9), opened right in the Color tab to paint. The hint reads Paint a 16:9 border with a transparent window, place it in a scene, then select it in Camera › Framing › Border.

A border made as a pattern

You can also make a border as a pattern. Start a New pattern from the home screen and select the Border kind. Select the aspect ratio (1:1, 4:5, 16:9, 9:16, or 3:2). The canvas opens at that ratio, with a see-through window in the middle 70% of the width and height. Paint it as usual. Saved borders are on the Borders tab of Patterns, under Your borders, and in the border picker. Border patterns don’t need to be placed in the scene.

Paint the border

In Paint , selecting the Transparent swatch makes the paint tools paint see-through. Setting the Eraser’s Erase to to Transparent does the same. The scene shows through the see-through parts.

Borders work in photo scenes too.

The Camera captures a border only while it is showing. A sheet that is the border does not cast shadows in the scene.

Newsletter

Don’t miss the next fig

New features, walkthroughs, and community picks, a few times a month, straight to your inbox. No spam, unsubscribe anytime.