Scenes

Everything in the scene

List, select, and set up placed pieces in the Scene list.

The Figs tab lists all placed pieces and their settings. Open the list with the Scene switch, or with Scene › Everything in the scene on the menu bar. The counts on the status strip ([N] figs or [N] moving) open the Figs tab. [N] moving counts every fig that moves: on a route, in a loop, posing in turn, with its own or its group’s moves, with a move that starts on a tap, or with a flip-book skin. Door and window openings aren’t counted.

The scene list

The panel has two views. Library shows your pieces to add. Scene lists all placed pieces by kind: figs, GROUPS, structures, and loose PARTS. Fig rows show the name and current settings (animation, outfit, skin). Group rows show the count (e.g., [N] together). Structures are listed under BUILDINGS, FENCES, DECKS AND PLATFORMS, and BRIDGES. Structure rows show a thumbnail, name, and details (e.g., 2 floors · 4 × 4 · 1 door). Multi-story structures on the same footprint are in one row, with their foundation, floors, and stairs. Loose building parts are listed under PARTS by kind (Stairs, Ramp). Selecting a row selects it in the 3D view and opens its page. A group’s row selects all its figs. The rows of every selected piece are lit, no matter the selection method.

When nothing is selected, the page shows a hint for the current view. On Library, it shows Place a fig with steps to add one. On Scene, it shows In the scene with the counts (e.g., 0 figs · 1 building).

The fig page

Selecting a placed fig in the view or the Scene list opens its page. Its head reads in the scene, or e.g. one of 2 in the scene when the scene has more than one copy of the fig; the page is for that one copy.

LibraryScene
Fox in the scene
WearingAs saved ▾
PaintedAs saved ▾
Pose⌂ Home ▾
Size 100%
Turn 0°
Move← ↑ ↓ →
Height +0.0
OverlapStack
Remove from scene
The Figs tab with a placed fig's page open.

The top section has override menus:

  • Wearing: Sets an outfit for this copy, or defaults to As saved.
  • Painted: Sets a skin, or defaults to As saved.
  • Pose: Sets a still pose (⌂ Home or a saved pose), or plays poses in turn (In turn…) once the fig has a saved pose. A fig that holds a pose of its own also has As saved before ⌂ Home. In the scene, a still pose that would leave the fig above the spot it stands on at ⌂ Home (e.g., a chair Sit) lowers it to the ground, on As saved too. The fig editor keeps the pose as it is. The list is the same as the Animate tab’s: see Scene animation . Animate › opens the Animate tab with the fig selected.
    • In turn… opens a pose picker. Select poses to add them to the list. Select a chosen pose again to remove it. Select Done to finish (needs at least two poses). The fig then plays the poses in a loop. The row shows the count (e.g., In turn · 3 poses). No run or selecting a single pose (⌂ Home too) clears the list. When poses play in turn, setting On the beat times them to the scene’s tempo.

Figs with move sets have a Move set row between Painted and Pose; it sets a move set by name or defaults to As saved. A move set selected while the scene plays starts at once. See Move sets .

Once the scene has a group, a Group row follows Pose. It shows the fig’s group, or No group. Select a group to add the fig to it (a fig in another group moves over), or No group to remove it from its group; it stays in the scene. For a fig in a group, Group page › at the foot of the menu opens the group’s page (see below).

Move controls are below the menus: Size (up to 1200%), Turn (rotates it), Move (moves it on the grid with arrows that follow the screen; walls stop it), and Height (raises or lowers it). The Overlap / Stack toggle lets the selected fig overlap other pieces or stack on top of them. Moving happens on the map grid . The Picked page on the World tab has the same move controls. Menu names on the World tab change Painted to Skin and Move set to Moves, and leave In turn… off Pose.

This copy

The THIS COPY section has settings for this copy only:

  • Show it: Shows or hides it (Shown or Hidden).
  • Lock it: Stops it from being moved (Unlocked or Locked). Pieces from design challenges show Part of the story and always stay locked.
  • Surface: Sets the surface look (Matte, Mirror, Water, Screen). See Shiny surfaces .
  • Ground: Sits on the land or sinks into it (On top or Digs in). Digs in shows Depth (Level, One down, Two down). Hidden indoors.
  • Border (flat sheets only): Keeps it in the scene or makes it the border over every shot (In the scene or As the border). A sheet of another shape than the Camera’s can’t be the border. See Camera Border .
  • Words (flat sheets only): Sets words on the sheet, with Types in for Showtime. See Words .
  • Shading: Smooth or flat shading (Smooth or Blocky). Figs saved with Rounded shading show Rounded.
  • Glow (glowing figs only): Casts light around it or not (Casting or Off). Casting shows Light play (Steady, Blink, Slow, Flicker). See Night and lamps .
  • Color tag: Cycles a color on its row and its footprint on the map grid.

In Room and other indoor settings, the PLACE section has a Wall button. Selecting it snaps the copy to the back wall. Selecting it again cycles through the other walls, then back to the floor. The camera turns to face that wall.

Figs with animation have a PLAY section: Play its moves plays the fig’s own moves; Play in the scene plays its scene routes or loops. See Scene animation .

The CHANGE IT section has Animate (opens the Animate tab) and Duplicate. Saved poses are selected on the Pose row at the top. Duplicate adds a copy with the same settings next to the original, with (2) on the end of its name.

Remove from scene deletes this copy. On a building part, the label reads Remove part and it deletes the whole connected structure. Building part pages have This building ▸ under PART OF A BUILDING, which opens the building’s page. To delete a single building part, use the Select tool on the map grid. See Build a building .

Groups and buildings

To work on several figs at once, select them. Select Select many… on the Scene list and tick rows (taps in the scene add figs too), or use the Select bar . On the Figs tab, its All and Box select figs only. Two or more selected figs open the picked figs page. Its head shows the count (e.g., 3 picked). While Select many is on, the page shows before two figs are ticked; with nothing ticked it shows Select figs in the list or in the scene. In Select many, tapping a group’s lit row opens the group’s page instead of unticking it; None on the Select bar unticks everything. Done choosing ends Select many and clears the selection.

Selecting a whole group opens the group page instead: select its row under GROUPS, tap one of its figs with Group on the Select bar, or select Group page › on a fig’s Group row. Its head shows the group’s name and count (e.g., 3 together).

Both pages start with the same tools. They act on the figs as one unit, around their middle:

  • Size: Grows or shrinks the figs and the gaps between them.
  • Spread: Moves the figs apart or closer together. Each keeps its size.
  • Turn: Turns the figs around their middle in 15° steps. Each fig turns to face round with it.
  • Move: Arrows that move all the figs a quarter block at a time, as the screen faces.
  • Flip: Mirrors the figs’ positions and facing, left to right as you see them. Each fig keeps its own shape.
  • Drop to ground: Sets each fig down on the floor, the land, or the building floor under it.

Size, Spread, and Turn go back to 100% (or 0°) when you let go; the figs stay as they are. Each drag or tap is one Undo step. Locked figs, photo cutouts, and figs on a wall stay in place.

The GROUP section (on the group page) or ALL PICKED (on the picked figs page) has Show it and Lock it for all of them. Locked, a drag can’t move them, and neither can Move, Turn, or Size. The group page adds Color tag, which cycles a color for the group and its figs. The figs are listed below under IN THE GROUP or PICKED FIGS; selecting one opens its own page. On the group page, each fig has Take out, which removes it from the group and leaves it in the scene.

The group page ends with:

  • Add figs ▾: Adds a fig from the scene to the group. A fig in another group moves over.
  • Rename: Names the group. A move group of exactly its figs uses the same name.
  • Animate together: Opens the Animate tab with all its figs selected. A move given there makes one group under the group’s name.
  • Duplicate group: Places a copy of the whole group beside it, as a group of its own (e.g., Group 1 copy). The copy’s page opens.
  • Split it up: Ends the group. Its figs stay where they are, still selected.
  • Remove group: Removes the group’s figs from the scene. Story pieces (a challenge kit’s own figs) stay in the scene, out of the group.

The picked figs page ends with:

  • Group: Shown with two or more figs selected. Makes them a group and opens its page. A new group is named Group 1, Group 2, and so on.
  • Add to group ▾: Adds the selected figs to a group. Shown once the scene has a group.
  • Ungroup: Shown when the selection includes a whole group. Ends that group; its figs stay in place.
  • Duplicate: Places a copy next to each selected fig. The copies are selected.
  • Remove: Removes the selected figs from the scene.

A group needs two figs: when only one is left in it, the group ends. Undo restores the removed figs, and the figs you had selected are selected again (e.g., Undo after Duplicate selects the originals). On the map grid or in the 3D view, dragging one of several selected figs, or a fig in a selected group, moves them all together.

Building pages show the building’s thumbnail, name, and parts (MADE OF; e.g., 32 wall pieces · 1 door · 32 floor tiles).

  • PEEK INSIDE: Hides parts so you can see in. Has Peek (Whole, Roof off, Front, Follow, See inside). Follow shows the Roof and ceilings toggle. Buildings with more than one floor show Floors.
  • Edit building ›: Opens World › Build with the building selected.
  • SAVE IT: Has Glue it into one fig, Box it as a set, and Take apart. See Sets . Glue it into one fig turns the building into one fig with its patterns baked in, while doors and windows still move as their own parts.
  • ROBLOX: Has the Ground under it toggle and Send it to Roblox to export.
  • Remove building: Deletes every floor in one Undo step.

Building changes and painting happen on the World tab: see Build a building .

Planted patches

Plants scattered with Scenery make a patch, listed under GROUPS (e.g., Nature patch, with its count). A patch isn’t a group of figs: the Group row and Add to group ▾ list groups of figs only, and no fig can join a patch. Selecting a patch’s row opens the patch’s page, with nothing selected:

  • Size: Makes the whole patch bigger or smaller together.
  • Spread: Spreads the plants apart, or draws them closer together.
  • IN THE PATCH: One row for each plant. Selecting one opens its page.
  • Rename and Animate together: As on a group’s page.
  • Split it up: Ends the patch. Its plants stay where they are.
  • Remove patch: Removes every plant in the patch from the scene. Undo restores them.

The skybox and terrain are not in the Scene list. Set them on the World tab .

Newsletter

Don’t miss the next fig

New features, walkthroughs, and community picks, a few times a month, straight to your inbox. No spam, unsubscribe anytime.