Scenes

See inside

Set the building parts that hide as the camera moves.

See inside hides parts of buildings so you can see in. There are five choices, set for every building on the Camera’s Buildings page (see The Camera ), or for one building on its own page.

CAMERA Photo16:9 · Free Set up FramingFree · 16:9›LookLofi · plain›Buildings›
← Buildings
Every buildingSee inside ▾
Lock side
Camera › Buildings with See inside picked. The status line says what the view does.

Every building sets the hidden parts on all buildings. One building at a time can use its own Peek to override it. The choices:

  • Whole: Hides nothing. Shows every part.
  • Roof off: Hides roofs and ceilings (skylights included) and keeps walls and floors.
  • Front: Hides walls that face the camera.
  • Follow: Hides the walls, openings, and corner posts in the way of the camera. The hidden parts keep changing as the camera turns. When set on one building with its Peek, it also hides roofs and ceilings.
  • See inside: Hides the same parts as Follow, plus everything above the map’s current floor. On one-floor buildings, this hides ceilings and roofs. The hidden parts change when you change the map’s floor.

Lock side keeps the hidden parts fixed as the camera turns, for every building or for one (Side locked open, for photos.). Turning it off shows Side follows the camera again.

Hiding only changes the view; the parts are still there. Setting Every building back to Whole restores the parts it hid; a building’s own Peek stays. Hidden parts can’t be tapped and lose their outline. The Every building and Lock side settings aren’t saved with the scene; every scene opens on Whole, not locked. A building’s own setting saves with the scene (see below).

The two settings add up. Every building sets the starting point. A building’s own setting can hide more, but can’t restore parts that Every building hides. For example, Whole on one building doesn’t undo See inside for every building, and Roof off on one building hides its walls and roof if Every building is on Follow. A building’s Floors applies on top of both (the lower cut applies).

Up close

In the 3D view and in Showtime, buildings made with Build open on their own when the camera comes close. With the camera inside a building or within 1.5 units of it, the walls, doors, windows, trim, and corner posts between the camera and its target hide. The roof hides too, along with the ceilings and floors above the target floor. The side and back walls stay. The hidden parts return once the camera is more than 2 units away; zooming out shows every part again.

This works on top of Every building and each building’s Peek, and changes nothing in the scene. Hidden pieces can’t be tapped in the 3D view. The Camera, photo scenes, the clip player, and every photo, loop, video, clip, and card picture show buildings as Buildings and Peek set them, with nothing hidden this way.

One building at a time

Buildings made with Build can have their own setting, one building at a time: setting Peek or Floors on another building moves it there. Floors, walls, and rooms you add to the building later use its setting right away, and Whole shows every piece again. Find it two ways:

  • In World › Build, set the Select bar’s Part to Building and select the building. Its page has Peek (Whole, Roof off, Front, Follow, See inside) under Building options. Choosing Follow shows the Roof and ceilings toggle (Hide | Show). Buildings with more than one floor show Floors (All floors, Up to floor N). Selecting it from other World doors shows a shorter card with the same settings.
  • In the Figs tab, select the building’s row under BUILDINGS. Its page has the same settings under PEEK INSIDE.

The Roof and ceilings toggle starts on Hide. With Follow on, this hides roofs and ceilings along with the walls in the way. Switching to Show restores roofs and ceilings while walls still hide as you turn.

A building’s own settings are kept. Peek, Floors, and Roof and ceilings save with the scene and are restored when it opens. A scene saved with Up to floor N opens the map grid on that floor, so new pieces go on that floor.

A dollhouse

A dollhouse is made with the usual building tools. To make one: go to World › Build and make a Room layout. Select the building and use Add a floor twice. Turn on Roof and select Peaked. Set the building’s Peek to Front. The walls facing the camera hide on every floor, so you can see inside.

Newsletter

Don’t miss the next fig

New features, walkthroughs, and community picks, a few times a month, straight to your inbox. No spam, unsubscribe anytime.